Heater Fan Blower Motor for Your Heating and Cooling Needs

The fan blower is an important component of any vehicle that helps maintain internal temperature as required. The same fan blower helps maintain the internal temperature, either cold or warm. In case your car’s Heater Fan Blower Motor isn’t working, and you have tried all the things you can, the ultimate option is to replace it. You may observe that the fan is making a lot of noise, or maybe the blower speeds aren’t working. Parts Factory Australia provides a brand new fan blower motor with a three-year replacement warranty.

How Fan Blower Motor Works

The fan blower makes sure that the cooling and heating system is working in your car. You can control it via a knob on the climate control panel.

• When the knob is on zero, there will be no air flowing
• When the knob is one 1, it is the lowest speed
• When the knob is on 2, the fan speed will be increased
• When the knob is on 3, you will observe an increase in fan speed
• When the knob is on 4, it is the maximum speed

Fan Blower Resistance

The resistance ensures that you can control the fan blower speed. Whether you are using a heater or air conditioner, the resistance is all that control variation in speed.

Heating or Cooling

The heating or cooling knob ensures that you get the required energy, i.e. heat or cooling.

Fixing or Replacing Fan Blower Motor of a Car

Present day vehicles are equipped with all of the necessary components to allow drivers to drive in any weather condition. The air conditioner in a car ensures that the driver and passenger will have enough cooling to sustain in hot, humid Australian weather. On the other hand, the heating system in a car ensures that the internal climate will be warm enough to give you comfort and warmth.

A car heater circulates the hot coolant from the engine through a device that looks like a miniature radiator to keep the car’s interior warm. The blowing motor or fan, the hoses, and the radiator are the most important components of an automotive radiator. We’ll go through how to repair or replace a car heater in this article.

Instructions

• Make sure the heater’s hoses are in good working order. Examine the heater’s various components for possible obstructions and damage. If your car has a summer valve, make sure it’s turned on.
• Check the fuse, connections, and any switches if your blown motor is not working properly. Blowing motors in certain cars also include resistors, which burn out over time and must be replaced. You may test the resistors with an ohmmeter.
• If your blower motor fails, replace it and be sure to follow the instructions in your vehicle’s repair manual. You must drain the cooling fluid and partially disassemble the dashboard in many circumstances. All of this must be done in accordance with the directions in the service manual.
• The heating system’s major component is the heater core. There are several options for replacing it. The heater core is usually found in the housing unit, which is either in the engine compartment against the firewall or beneath the dashboard. If the heater core needs to be replaced, follow the directions in the service manual to do so.
• Take a short test drive in your car to see if the heating is operating properly. The best option is to get some ice cream and drive back home. If it melts on the way home, it implies your heater is working.

Replace the Heater Fan Blower Motor

In case you observe that the Heater Fan Blower Motor is no longer working even though you put every effort to correct it, you must replace it with a brand new blower motor. If you are looking for Heater Fan Blower Motor, Parts Factory Australia has the following options for you.

Holden Rodeo Heater Fan Motor

This is a brand new Holden Rodeo Heater Fan Motor which can be installed easily. We have a video tutorial for you that can help you replace this unit as it is a simple pull and replace task for you. We deliver it to your address without any extra charge while you get a three-year replacement warranty.

”Close”