A fan motor on its own is not the same package as a cooling-fan assembly with shroud and control module. When comparing the selected Focus LS/LT replacement, check all of those components alongside the original socket and wiring route.
The application here is the listed 05/2005–02/2009 LS/LT sedan or hatch with the 2.0L Duratec petrol engine, automatic or manual. A Focus nameplate or a rounded year range is only a starting point.
Identify the selected three-pin assembly
The Focus LS/LT three-pin cooling-fan assembly is referenced to 3M5H-8C607-RJ. Its package includes the single fan, motor, rectangular shroud and pictured control module.
Match the original reference, three-pin socket, cable route and mounting tabs together. A similar fan blade does not establish the module or electrical configuration, and a matching-looking socket does not establish the complete shroud fit.
Compare the full shroud view
Compare the original from the same direction so the module position, cable and tabs remain easy to follow. Ask for a clearer socket view if the original electrical details are not readable. Do not treat an unseen connector or mounting point as an assumed match.
Confirm the package and configuration
Establish whether an offer supplies a bare motor, a fan-and-shroud unit or the selected assembly with module. Those descriptions carry different inclusions. The linked product’s photographs describe its supplied configuration; another manufacturer’s cross-reference should be checked against its own specification.
The NRF manufacturer entry for 470112 supports the reference identity and three-pin configuration for its assembly. It does not remove the need to compare the exact replacement being ordered with the vehicle’s original.
Keep selection separate from fault finding
A fan that does not operate is a symptom, not proof that a complete assembly is required. Have the workshop establish the fault and the required repair scope. This guide does not supply a universal electrical test, module-programming promise or fan activation temperature.
For a fitment enquiry, send the VIN, build month, LS/LT and engine details, original reference and accessible photographs of the shroud, socket, module, wiring and mountings. Keep clear of the fan while it may operate. Once the match is confirmed, use the product link for the full specification and availability.
Prepared from application records, catalogue checks and the linked product photographs. The featured workshop scene is an AI-generated editorial illustration. Information reviewed on 3 November 2026.