The selected X-Trail T30 ABS sensor is for the front-right wheel within the listed 11/2003–01/2006 build scope. Its connector is only one comparison point: the attached lead, routing clips and grommet positions also need to agree with the original.
A T30 badge does not extend this offer to earlier builds, another wheel position or a T31. Establish the exact application before comparing the cable photograph.
Confirm the restricted QR25DE application
The selected T30 front-right wheel-speed sensor uses reference 47910-EQ010. The Australian scope is T30/TBNT30 4WD SUV, 2.5L QR25DE petrol, 132kW, with automatic or manual transmission.
Keep the VIN, actual build month, engine and front-right position with the original reference. Earlier T30 builds, left-front and rear sensors, and T31 applications are excluded by this listing.
Compare the grommets and routing with the plug
The selected unit has a grey keyed two-contact connector, attached lead, routing clips, body grommet and single-hole mounting flange. Match actual contacts and keying, sensor tip, route and grommet positions.
Connector colour or a matching contact count cannot establish the whole assembly. Keep close-ups associated with a full-unit view. A loose lead laid in a curve is not a picture of its installed route and should not be used to estimate cable length from perspective.
Keep the sensor separate from the hub and control unit
The offer supplies one front-right sensor with attached lead and grommets. Hub, bearing and ABS control unit are excluded. The package does not identify which component caused a warning lamp or fault code.
Have the system diagnosed and fitted using the correct vehicle-specific workshop information. This identification guide does not give brake testing, electrical values, lifting or installation instructions.
Make the wheel-position enquiry clear
Provide the vehicle details, original number, front-right position and accessible labelled photographs of the full lead, plug, tip, flange and grommets. State any mismatch before choosing the part, especially a different build month or cable attachment arrangement.
Prepared from application records and the linked product photographs. The featured workshop scene is an AI-generated editorial illustration. Information reviewed on 3 November 2026.